Adjusting The Display; How To Adjust - Sharp LL-M15X1 Operation Manual

You can adjust TV and video images and perform
various settings using menus for the TV/AV mode.
- All the menus except for the CHANNEL
SETTING menu are common for TV and AV
modes. All the values set in TV mode will be also
applied in AV mode.

How to adjust

The following procedure describes the basic
operation method. See pages E51 and E52
regarding individual options.
1. Select the TV mode or AV mode.
See page E25 for more information.
2. Display the MENU screen using the MENU
button.
MENU
VIDEO ADJUST
CHANNEL SETTING
MODE SELECT
CLOSED CAPTION
V-CHIP BLOCK
3. Select the menu you want to set using the MENU
button (monitor) or the
control), and press the ENTER/BRIGHT MODE
button (monitor) or the ENTER button (remote
control).
4. Select the option you want to set using the
MENU button (monitor) or the
(remote control), and press the ENTER/BRIGHT
MODE button (monitor) or the ENTER button
(remote control).
5. Change the numbers/values using the
VOL/BRIGHT buttons (monitor) or the
buttons (remote control).
You can continue to set other options.
Do the following to return to the previous screen:
(1) Select "RETURN" using the MENU button
(monitor) or the
control).
(2) Press the ENTER/BRIGHT MODE button
(monitor) or the ENTER button (remote
control).
6. Exit the MENU screen using the INPUT button
(monitor) or the MENU button (remote control).
The procedure is complete.
Note:
- If you do not press any buttons for about 30
seconds while in a menu screen, the settings
you made up to that point will be applied and the
screen will automatically disappear.
g02.P65

Adjusting the display

< >
TV/AV
>>
>>
>>
>>
>>
buttons (remote
buttons
buttons (remote
50
E50
9/17/2003, 3:00 PM