Sharp LL-M15X1 Operation Manual page 62

Relevant signal timings (PC mode)
Display mode
VESA
US text
Power
Macintosh
series
- Recommended resolution is 1024 x 768.
- All are compliant only with non-interlaced.
- Frequencies for Power Macintosh are reference
values. To connect, another adapter
(commercially available) may be required.
- If the monitor is receiving timing signals that are
not compatible, "OUT OF TIMING" will appear.
Follow your computer's instruction manual to set
the timing so that it is compatible with the
monitor.
- If the monitor is not receiving any signal (synch
signal), "NO SIGNAL" will appear.
g02.P65
Specifications
Dot
Hsync Vsync
frequency
60
The analog RGB input connector pin
(Mini D-sub connector with 15 pins)
No. Function
1 Red video signal input
2 Green video signal input
3 Blue video signal input
4 GND
5 GND
6 For red video signal GND
7 For green video signal GND
8 For blue video signal GND
9 +5V
10 GND
11 N.C.
12 DDC data
13 For Hsync signal input
14 For Vsync signal input
15 DDC clock
Power management
The monitor is based on VESA DPMS (Display
Power Management Signaling).
To activate the monitor's power management
function, both the video card and the computer
must conform to the VESA DPMS standard.
DPMS mode Screen
ON Display on
STANDBY
SUSPEND Display off
OFF
DDC (Plug & Play)
This monitor supports the VESA DDC (Display
Data Channel) standard.
DDC is a signal standard for carrying out Plug &
Play functions on the monitor or PC. It transfers
information such as degree of resolution between
the monitor and PC. You can use this function if
your PC is DDC compliant and if it is set so that it
can detect the Plug & Play monitor.
There are many varieties of DDC due to the
differences between systems. This monitor works
with DDC1 and DDC2B.
E60
9/17/2003, 3:00 PM
Power
H-sync V-sync
consumption
35 W Yes Yes
No Yes
2 W Yes No
No No