Hisense Party Rocker One, Party Rocker One Plus Manual

What's in the Box

Identifying the Parts

1. MASTER VOLUME
   Increase/Decrease the volume level
2. LIGHT
   Select the different lighting mode of LED indicator
3. POWER ON/OFF
   Power on/off
4. SOURCE
   Select a play function
5. INDICATOR LIGHT
   Built-in battery charging indicator
6. WIRELESS CHARGING
   Wireless charging
7. DISPLAY SCREEN
   Display screen
8. VOCAL FADER
   Switch between vocal fader on and vocal fader off
9. BASS
   ON/OFF the BASS mode
10. EQ
    Equalizer manual mode
11. NEXT
    Press to the next track
12. PLAY/PAUSE/PAIR
    Play/Pause/Pair playback
13. PREVIOUS
    Press to the previous track

Connections

• Before connecting the AC power cord, ensure you have completed all other connections.

(*Only for Party Rocker One Plus)

Basic Operation

Standby/ON

• Press the button on the unit to switch the main unit ON,Press and hold for 2 seconds to OFF.
• Disconnect the main plug from the main socket if you want to switch the unit off completely.
• When there is no input signal from the unit more than 15 minutes, it will switch to Standby mode automatically.

DJ Effect

• Press the DJ button to the select different DJ effect.
• Press the DJ key once to play the current DJ. When you press the DJ continuously within 1 second, cycle to select different DJ sound effects. Press the DJ key for I second to start playing the current DJ sound effects after no operation;
• DJ sound effect types: DJI cheering sound, DJ2 alarm sound, DJ3 drum sound, DJ4 horn sound, DJ5 disc playing sound.

Select Modes

• Press the button on the unit to select the play function BT USB AUX FM mode.

Adjust the Volume

• Press the VOL+/VOL- button on the unit to adjust the volume.

Preset Equalizer

• During play, press the EQ button repeatedly to select: ROCK-JAZZ-SAMBA-POP-BALANCE.

Bass settings

• Press BASS button to select BASS ON / BASS OFF.

Adjust the LED light

• Press the button repeatedly to select the LED effect: LED OFF, LED1, LED2, LED3, LED4, LED5.
• Press and hold to switch ON/OFF the strobe light

Bluetooth Operation

• Select"Hisense Party Rocker One"or"Hisense Party Rocker One Plus"in the pairing list.

TWS Connection

FM Radio Operation

Press button repeatedly to select the TUNER source. The display will show"TUNER".

TUNING in a Station
Auto Tuning

1. Press and hold button to start auto tuning. Press button again to stop the auto tuning.
2. The searched radio stations will be stored as preset stations.
   Note: The search may not stop at a station with a very weak signal.

Manual Tuning
Press and hold or button to start the forward or reverse scanning. The display will show the frequency being searched. Once a station has been found, the scanning will stop automatically to change the frequency until you find the station you want.

Searching for a radio station manually

1. Briefly press the buttons or until the optimal reception frequency is reached.
2. Each time the buttons or are pressed, the frequency decreases/increases by 0.05MHz.

Recalling a preset station

1. Press button to switch between preset station and frequency.
2. Press button to select your desired preset station.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Hisense Party Rocker One, Party Rocker One Plus Manual