Motion Sensor Setting - Sanyo MPX-CD163 Instruction Manual

ALARM SET-7
ALARM SET SETTINGS

MOTION SENSOR setting

(default setting: OFF)
To display motion sensors on each camera image and make
settings for intruder detection. The motion sensors work as
shown below.
1 2
----------------
----------------
----------------
----------------
----------------
----AAAA--------
----------------
----------------
------------BBBB
----------------
CAMERA NO.01 T-1 LEVEL:OFF MODE:A
3 4
1
Motion sensor off status
When the cursor button is pressed, the cursor moves.
2
Sensor setting
When the setting buttons are pressed, the setting changes to
"A", "B" or "–".
Set to "A" or "B" in accordance with the desired sensor
detection position.
3
Camera display
When the camera select button is pressed, the camera
number changes. Use the camera select button to select
cameras that are set for motion sensor alarms.
4
Setting motion sensor operating times
Use timer settings to select specified time zones (T-1 to 4).
This will enable an alarm to be detected by motion sensors
with specified sensitivities only in the selected time zones
(See page 36).
5
Motion sensor sensitivity setting
This sets the sensor sensitivity.
1, 2, 3, 4 ... (the higher the number, the lower the
sensitivity), OFF
6
Motion sensor detection setting
A: A motion sensor alarm is generated when a moving
object is detected at A.
A AND B: When an object is detected touching both
sensors at point A and point B, a motion sensor alarm will
be triggered.
A AND NB: With point A aligned on an important item
(object) and point B aligned on a non-moving object, a
motion sensor alarm will be triggered when the object at
point A is detected, without reacting to changes such as
the brightness of the whole screen.
B TO A: A motion sensor alarm will be triggered if there is
any change in the movement of a subject passing from
point A to point B.
C: A motion sensor alarm is generated when the whole
screen area changes uniformly. This results in a reaction
at times such as when the camera is sprayed with
something. (Sensor settings are not required.)
English
2
5 6
Example: To record images detected by the
motion sensor for the timer
setting duration
1
Set the TIMER setting in the CLOCK SET menu to
"ON", make the settings for TIMER-A and
TIMER-B in the TIMER SET menu, and then select
MOTION SENSOR and close the CLOCK SET
screen.
Press the MENU button.
2
The MAIN MENU screen will be displayed.
MENU
Use the cursor button to select
3
"ALARM SET" and then press the
NEXT
NEXT button.
The ALARM SET screen will be displayed.
Use the cursor button to select
4
MOTION SENSOR "OFF", press the
setting buttons to change the
setting to "ON", and then press the
NEXT button.
The motion sensor alarm setting screen
– +
NEXT
will be displayed.
Press camera select button 5.
5
The image from camera 5 appears and T-1
5
flashes.
– 67 –
(MAIN MENU)
1 LANGUAGE ¤
2 CLOCK SET ¤
3 DISPLAY SET ¤
4 VCR SET ¤
5 ALARM SET ¤
6 SECURITY SET ¤
7 CONTROL SET ¤
8 ALARM DATA ¤
(*:NEXT)
(ALARM SET)
ALARM OFF
ACTIVE REC. OFF
MOTION SENSOR OFF
VIDEO LOSS OFF
(ALARM SET)
ALARM OFF
ACTIVE REC. OFF
MOTION SENSOR ON *
VIDEO LOSS OFF
(*:NEXT)
----------------
----------------
----------------
----------------
----------------
----------------
----------------
----------------
----------------
----------------
CAMERA NO.05 T-1 LEVEL:OFF MODE:A
ALARM SET-7