Sanyo MPX-CD163 Instruction Manual page 56

VCR SET-3
VCR SET SETTINGS
Use the cursor button to select SW.
6
IN EDGE (example: ), and then
– +
press the setting buttons.
RECORDER
REC.SPEED
ALARM REC.SPEED
SW.IN EDGE
REC.PICTURE
PROGRAM REC.
Display examples:
: Switch timing on rising edge of SW signal
: Switch timing on falling edge of SW signal
: Switch timing on both rising and falling edges of SW
signal
Use the cursor button to select
7
REC. PICTURE (example: 01), and
– +
then press the setting buttons.
RECORDER
REC.SPEED
ALARM REC.SPEED
SW.IN EDGE
REC.PICTURE
PROGRAM REC.
This sets how many copies of the image from the various
cameras are recorded when they are output from the VCR
OUT connector. When this setting is made, it eliminates the
cross talk that can occur when the camera images are
recorded.
The same image can be recorded continuously up to a
maximum of 99 times.
Even if this setting is set to 1, the PROGRAM REC. and
ACTIVE REC. settings may prevent recording of images one
at a time.
VCR SET-3
English
(VCR SET)
TLS
2 H
2 H
ñ
01
OFF
(VCR SET)
TLS
2 H
2 H
ñ
01
OFF
– 55 –