Resetting An Alarm - Sanyo MPX-CD163 Instruction Manual

ALARM SET-9
ALARM SET SETTINGS

Resetting an alarm

When images from the camera where the alarm was detected are appearing in a single-screen display
Press the camera select button for the camera that is being shown
in the single-screen display.
4
The alarm will then be canceled.
When images from the camera where the alarm was detected are displayed in a multiple-screen
Press the camera select button for the camera that is showing the
alarm.
4
The alarm images will appear in a single-screen display.
1
Press the camera select button again.
The alarm will then be canceled.
4
2
English
ALARM SET-9
– 69 –