Specifications - Sanyo MPX-CD163 Instruction Manual

SPECIFICATIONS

Signal format
Camera signal input synchronization
Camera video input connectors
Camera video output connectors
VCR input connector
Composite input
S-Video input connector
Digital input connector
VCR output connector
Composite output
S-Video output connector
Digital input connector
Main monitor output connector
(MAIN MONITOR)
S-Video output connector
Spot monitor output connectors
(SPOT MONITOR 1 - 4)
Control connector
Remote control input (R1, R2)
Alarm output (AL)
Switch input (SW)
Alarm input connectors
Sensor alarm output connector
RS-485 control connector
RS-232C connector
Automatic screen switching timing
Monitor on-screen display
Menu settings
Alarm sensor
Back-up function
Operations
Still image
2x zoom
Power
Consumption
Operating environment temperature
Operating environment humidity
Dimensions
Weight
Products are subject to change in design and specifications without notice and without incurring any obligation.
: Based on NTSC color signal standard
: Asynchronous
: VS/VBS, 1.0 Vp-p/75 , BNC connector x 16 Control signal superimposed when camera operating
(MPX-CD93: BNC connector x9)
: Throughput of each input, 1.0 Vp-p/75 , BNC connector x 16 (MPX-CD93: BNC connector x9)
: VS/VBS, 1.0 Vp-p/75 , BNC connector x 1
: Separate YC signals, DIN connector (S terminal) x 1
Y signal: 1.0 Vp-p/75 , unbalanced, synchronous; C signal: 0.286 Vp-p/75 , unbalanced
: RJ-45 x 1
: VS/VBS, 1.0 Vp-p/75 , BNC connector x 1
: Separate YC signals, DIN connector (S terminal) x 1
Y signal: 1.0 Vp-p/75 , unbalanced, synchronous; C signal: 0.286 Vp-p/75 , unbalanced
: RJ-45 x 1
: VS/VBS, 1.0 Vp-p/75 , BNC connector x 1
Camera live image or VCR playback image output: single-screen, automatic switching image,
multiple-screen
: Separate YC signals, DIN connector (S terminal) x 1
Y signal: 1.0 Vp-p/75 , unbalanced, synchronous; C signal: 0.286 Vp-p/75 , unbalanced
: VS/VBS, 1.0 Vp-p/75 , BNC connector x 4
Camera live image: single-screen (Same image as main monitor selectable using menu/SPOT MONITOR
1 only)
: 2-wire type with resistance-based identification system
: 5 V DC, 5.7 k (Low output)
: Low input, for input signal from SW OUT of timelapse VCR/real time VCR (as per this manufacturer
specifications)
: No voltage, make-contact switch input x 16 (Low input) (MPX-CD93: BNC connector x9)
: Alarm output x 16 (low output, normally open) (MPX-CD93: BNC connector x9)
: RJ-11 type: 2 connectors (A/B), Push-lock type: 3 connectors (A, B, Ground)
: 9-pin D-SUB
: Available in single-screen and quad mode, with interval selectable from 1 – 30 sec.
: Title (up to 10 characters), date, time selectable
: 8 menus
: Built-in 16 x 10 sensor, 16 channel (each camera video input, selectable) (MPX-CD93: 9 channel)
: Back-up of the clock settings for up to 30 days after connected for 30 hours continuously
: Available for camera live or VCR playback in single-screen and zoomed in still image
: Available for camera live or VCR playback in full screen and frozen picture
: AC 120 V, 60 Hz
: 300 mA (18 W)
: 5 to 40°C
: 10 to 80%
: 420 (W) x 86 (H) x 360 (D) mm
: Approx. 5 kg
– 80 –
English