Sanyo VCC-HD2100 User Manual page 41

You can click one grid cell after another to set or cancel the masked area cell by cell.
To deselect a block of grid cells in the masked area, right-click one of grid cell and drag the mouse.
3
Click and then
SET
The settings are saved and you return to the sub menu.
Configure the electronic shutter or electronic iris settings according to the movement and luminance level of the
subject.
Disables the electronic shutter or electronic iris function.
OFF:
SHORT: Enables the fast shutter mode.
Enables the long exposure shutter mode.
LONG:
EI: Electronic iris
The configured settings will be applied to "CAM1" or "CAM2", whichever you selected under [VIEW].
The fast shutter mode has a shorter exposure time than the field storage time.
Configuring the fast shutter mode enables you to capture quick motion in the subject.
You cannot select "SHORT" to configure the fast shutter mode if the electronic sensitivity boosting
([SENSE UP] in [IRIS]) is enabled.
1
In [SHUTTER], select "SHORT".
2
In [SHUTTER SPEED], select the desired shutter speed and click
The available options vary depending on the model used.
VCC-HD2300P/VCC-HD2100P: 25, 50, 120, 250, 500, 1000, 2000, 4000, 10000
VCC-HD2300/VCC- HD2100 :
Each of the above shutter speed values represents the denominator "n" of the fraction 1/n. For
example, selecting "500" means to set a shutter speed of 1/500 second.
The long exposure shutter mode has a longer exposure time than the field storage time.
The long exposure shutter mode increases the sensitivity of the camera to make the subject brighter.
You cannot select "LONG" to configure the long exposure shutter mode if the electronic sensitivity
boosting ([SENSE UP] in [IRIS]) is enabled.
.
BACK
30, 60, 100, 250, 500, 1000, 2000, 4000, 10000
Working with Administrator Configuration Screens 22/50
SET .