Sanyo VCC-HD2100 User Manual page 84

1
Select the desired camera and click
The camera information dialog box opens.
2
Make changes to the camera data and click
This transmits your changes to the camera.
You can see the problem of IP address overlap has been resolved in the [Status] row of the list, which has been
changed from "CAUTION" to "OK".
You cannot change the model name.
If your login user name and password has been changed from the factory default settings, you will be
presented with an authentication check dialog box. In this case, type the current user name and
password.
If SSL communication is enabled for the selected camera, you cannot edit the camera data. Change
the SSL and port number settings in the authentication check dialog box.
.
Manual setting
EXECUTE .
Before You Begin Network Operation 5/13