Sanyo VCC-HD2100 User Manual page 13

Buttons on the control panel/tool panel do not respond.
1 You do not have the required operation privilege.
Some buttons on the control panel/tool panel are operable only when you have an adequate
operation privilege. Log in as a user with an adequate operation privilege.
2
You have not configured the required operation settings.
The Remote Alarm buttons are operable only when you have set [ALARM OUT 1/2] to "REMOTE"
on the ALARM SETTINGS screen.
The [MENU] button does not respond.
Users other than admin and operator do not have the necessary privilege for performing operations
from the configuration menu.
Without the required operation privilege, you will be presented with an authentication check dialog
box when you click the [MENU] button on the live screen.
In this case, you can change the operation privilege by entering a user name with an adequate
operation privilege and its password in the dialog box.
Q&A 4/10