multicomp pro MP710256 US User Manual page 7

Characteristics of the Voltage Output
The power supplies MP710256 & MP710257 are regulated DC power supplies with a high voltage and current output. These
operate in CC or CV mode within a wide operating range limited only by the output power.
The operating area of each power supply is determined by the rated output power as well as the voltage and current rating.
When the power supply is configured so that the total output (current *voltage output) is less than the rated power output, the
power supply functions as a typical constant current, constant voltage power supply.
If however, the power supply is configured such that the total output (current* voltage output) exceeds the rated power output,
the effective output is actually limited to the power limit oft he unit. In this case the output current and voltage then depend
purely on the load value.
Below is a comparison of the operating areas of each power supply.
Newark.com/multicomp-pro
Farnell.com/multicomp-pro
sg.element14.com/b/multicomp-pro
Page <7> 26/07/24 V1.0