multicomp pro MP710256 US User Manual page 4

Key lock function and Buzzer setting function
ON/OFF output and Dynamic output function
RS485 ID setting function
Voltage and current priority function
M1-M5 quick recall / storage function and Dynamic
output function
Press: turn off the flashing while setting
Press and hold: set the slope and press again to
exit the setting. And the unit is V/lOOuS.
Front output terminal: the max output current of the
secondary terminal is lOA. And the output of the power
supply will be automatically cut off if the
current exceeds lOA.
Rear Panel Description
AC input
AC input 11SV/230V switch
Newark.com/multicomp-pro
Farnell.com/multicomp-pro
sg.element14.com/b/multicomp-pro
Page <4> 26/07/24 V1.0