RAB Lighting PLAYER ONE Installation Instructions

INSTRUCTIONS
PLAYER ONE™ INSTALLATION
RAB Lighting is committed to creating high-quality, aff ordable, well-designed and energy-effi cient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We'd love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: marketing@rablighting.com
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
RAB fi xtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding
is required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing or maintaining xture. No user serviceable parts inside.
CAUTION: For proper weatherproof function all gaskets must be seated properly and all screws inserted and tightened
rmly. Silicone all plugs and unused conduit entries.
•
DO NOT make or alter any open holes in the luminaire. Do not modify the luminaire.
•
Risk of eye injury! Eye protection is required at all times during the installation, operation, and maintenance of the
luminaire.
•
The high intensity light produced by the luminaire can cause severe damage to the eye if viewed directly at close
range. Avoid being in front of a luminaire that is on or wear suitable light blocking protective eye wear such as welding
goggles. The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 33
feet is not expected.
•
NEVER point the aiming laser at any person or animal as it can cause permanent damage to eyes. Use laser only for
aiming xtures as directed.
•
CAUTION - RISK OF FIRE.
•
This product is not available for several special environments, such as places with corrosive gas liquids or high pressure
water vapor.
•
This luminaire is designed to operate in ambient temperatures ranging from -40°C to 50°C (-40°F to 122°F).
•
Note that cables are connected in sequence to distinguish wiring "LED+" and "LED-"
CAUTION WHEN USING THE LASER AIMING ASSEMBLY, NEVER LOOK DIRECTLY INTO THE LASER BEAM (sold separately).