Table of Contents
Advertisement
Setting Speaker Level
F.L (Front-Left) : -10 ~ +10dB
•
CEN (Center) : -10 ~ +10dB
•
F.R (Front-Right) : -10 ~ +10dB
•
S.R (Rear-Right) : -10 ~ +10dB
•
S.B (Rear Center): -10 ~ +10dB
•
S.L (Rear-Left): -10 ~ +10dB
•
S.W (Subwoofer): -10 ~ +10dB
•
Remote Control
1
Press and hold SURROUND for about 5 seconds.
"SETUP MODE" appears on the display and enters into Setup Mode.
•
2
Press INPUT button 7 times.
"LEVEL SETUP" appears on the display.
•
3
Press SURROUND button.
Each time you press this button, F.L
•
will be selected in turn.
4
Press SELECT(
,
want.
You can adjust it from -10 to +10dB by 1 step.
•
The sound gets smaller at -10dB and louder at +10dB.
•
Default setting value is 00dB
•
5
Repeat the steps 3 and 4 to set it.
To Exit Setup Mode
Wait for about 5 seconds or turn VOLUME CONTROL of the main unit. "SETUP
•
MODE OFF" appears on the display and exits Setup Menu.
CEN
F.R
S.R
) button to set to the speaker level you
S.B
S.L
S.W
26
Advertisement
Table of Contents
