Download  Print this page

Test Tone; Main Unit - Samsung HT-AS600 Instruction Manual

Digital surround av receiver system.
Hide thumbs

Advertisement

Test Tone

Use test tone to check speaker connection status or level.
To Automatically Output Test Tone

MAIN UNIT

1
2
3
To Stop Test Tone
Method 1) Press INPUT button 2 times.
"TEST-T OFF" appears on the display and test tone stops.
Method 2) Turn VOLUME CONTROL.
"SETUP MODE OFF" appears on the display and test tone stops.
25
Press SETUP button.
"SETUP MODE" appears on the display and enters into Setup Mode.
Press INPUT button 4 times.
"TEST-T AUTO" appears in the display.
Press SURROUND button.
Test signal will be automatically output as follows; F.L
CEN
S.R
S.L
S.W .
During test signal output, press SELECT (
) button to adjust the speaker
,
output level from -10 to +10 dB by 1 step.
F.R
Test Tone Output
F.L (Front-Left) : -10 ~ +10dB
CEN (Center) : -10 ~ +10dB
F.R (Front-Right) : -10 ~ +10dB
S.R (Surround-Right) : -10 ~ +10dB
S.L (Surround-Left): -10 ~ +10dB
S.W (Subwoofer): -10 ~ +10dB
To Manually Output Test Tone
MAIN UNIT
1
Press SETUP button.
"SETUP MODE" appears on the display and enters into Setup Mode.
2
Press INPUT button 5 times.
"TEST-T MANU" appears in the display.
3
Press SURROUND button.
Each time you press this button, F.L
CEN
F.R
selected in turn.
4
Press SELECT(
,
)button to set the test tone as you want.
You can adjust the speaker output level from -10 to +10dB by 1 step.
To Stop Test Tone
Method 1) Press INPUT button 1 time.
"TEST-T OFF" appears on the display and test signal stops.
Method 2) Turn VOLUME CONTROL.
"SETUP MODE OFF" appears on the display and test tone stops.
S.R
S.L
S.W will be
26

Advertisement

Table of Contents

   Related Manuals for Samsung HT-AS600

This manual is also suitable for:

Comments to this Manuals

Symbols: 0
Latest comments: