Table of Contents
Advertisement
Test Tone
Use test tone to check speaker connection status or defect of speaker or adjust the level.
23
To Automatically Output Test Tone
MAIN UNIT
1
Press and hold SURROUND button for about 5 seconds.
"SETUP MODE" appears on the display and enters into Setup Mode.
•
2
Press INPUT button 4 times.
"TEST-T AUTO" appears in the display.
•
3
Press SURROUND button.
Test signal will be automatically output as follows; F.L
•
S.L
S.W .
During test signal output, press SELECT (
•
level from -10 to +10 dB by 1 step.
To Stop Test Tone
Method 1) Press INPUT button 2 times.
"TEST-T OFF" appears on the display and test tone stops.
•
Method 2) Turn VOLUME CONTROL.
"SETUP MODE OFF" appears on the display and test tone stops.
•
√
CEN
) button to adjust the speaker output
,
F.R
S.R
S.B
Advertisement
Table of Contents
