Test Tone - Samsung HT-AS720S Instruction Manual

Test tone

Use the test tone check the speaker connection status or level.
To automatically output test tone
1
2
To stop test tone
Press SETUP/MENU button once time.
•
"SETUP OFF" appears on the display and test tone stops.
Using the Test Tone button
Press TEST TONE button.
Test signal will be automatically output as follows; F.L ➝ CEN ➝ F.R ➝ S.R ➝
•
SBR ➝ SBL ➝ S.L ➝ S.W.
During test tone output, press ...† button to adjust the speaker output level from
•
-10 to +10 dB by 1 step.
26
√
Press SETUP/MENU button, and then press the ENTER
button.
• "SETUP MODE" appears on the display and the unit goes into Setup Mode.
Press button to select the "TEST-T AUTO",
and then press the ENTER button.
Test signal will be automatically output as follows; F.L ➝ CEN ➝ F.R ➝
•
S.R ➝ SBR ➝ SBL ➝ S.L ➝ S.W .
During test signal output, press ...† button to adjust the individual speaker
•
output level from -10 to +10 dB by 1 step.
To Manually Output Test Tone
√
1
Press SETUP/MENU button, and then press the ENTER
button.
"SETUP MODE" appears on the display and goes into Setup Mode.
•
2
Press ➛¤❿ button to select the "TEST-T MANU", and then
press the ENTER button.
3
Press ➛¤❿ button to select the speaker you want..
Each time you press ➛¤❿¤button, F.L ➝ CEN ➝ F.R ➝ S.R ➝ SBR ➝ SBL ➝
•
S.L ➝ S.W will be selected in turn.
4
Press ...† button to set the test tone as you want.
You can adjust the speaker output level from -10 to +10dB by 1 step.
•
• The sound gets quieter at -10dB and louder at +10dB.
To stop test tone
Press SETUP/MENU button once time.
•
"SETUP OFF" appears on the display and test tone stops.
Test Tone Output
F.L (front left) : -10 ~ +10dB
•
CEN (center) : -10 ~ +10dB
•
F.R (front right) : -10 ~ +10dB
•
S.R (surround right) : -10 ~ +10dB
•
SBR (surround back right) : -10 ~ +10dB
•
SBL (surround back left) : -10 ~ +10dB
•
S.L (surround left) : -10 ~ +10dB
•
S.W (subwoofer) : -10 ~ +10dB
•
ENG
27