Setting The Clock; Setting The Timer - Aiwa CX-NA31 Operating Instructions Manual

SETTING THE CLOCK SETTING THE TIMER
1
2,4
6
2
—.
4U
Press the CLOCK button while pressing the
The unit can be turned on at a specified time every day with the
SHIFT button on the remote control, and press
built-in timer.
the II SET button within 4
seconds.
Pre~aration
3
To display the current time
If you press the II
SET button after 4 seconds, another
Press the CLOCK button while pressing the SHIFT button on
operation may start.
the remote control. The time is displayed for 4 seconds.
2 Designate the hour of the timer-on time by
However, the time cannot be displayed during recording. pressing the < DOWN or P UP button, and
To switch to the 24-hour standard
press the II SET button. Repeat to designate the
Press the CLOCK button while ~ressina the SHIFT button on
minute of the timer-on time.
If power is interrupted for more than approximately 24 hours,
all settings stored in memory after purchase need to be reset.
3 Within 4 seconds, press the FUNCTION button
repeatedly to select a source.
The selected source name flashes for 4 seconds.
If this step is not completed within 4 seconds, repeat from
step 1.
If the TUNER button is pressed, the band cannot be selected
in this step.
4 Within 4 seconds, select the duration for the
timer-activated period with the +4 DOWN or ~
UP button.
19
ENGLISH