Aiwa CX-NA31 Operating Instructions Manual page 11

-,
BA:S[C OPERATIONS
2
+4 DOWN
BLIP
A EJECT
Deck 2
Use 'rype I (normal) tapes only.
7 Press the TAPE button and press the A EJECT
mark to open the cassette holder.
About cassette tat3es
"roprevent accidental erasure,
break off the plastic tabs
on the cassette tape after recording with a screwdriver or
other pointed tool.
Side A
Tab for side A
To record on the tape again, cover the tab openings with
adhesive tape, etc.
M120-minute or longer tapes are extremely thin and easily
deformed or damaged. They are not recommended.
*
Take up any slack in
the tape with a pencil or similar tool
before use. Slack tape may break or jam in the mechanism.
Insert a tape with the exposed side down. Push the cassette
holder to close.
2
Press the > button to start play.
Only the side facing out from the unit can be played back.
The selected deck number tape counter
To select a playing deck
When tapes are loaded in both decks, press the TAPE button
first lo select a deck.
The .seliscted deck number is displayed.
To
stop
play,
press the button.
To pause play (deck 2 only),
press the II button. To resume
play, press again.
To fast forward or rewind,
press the - or > button. Then
press the button to stop the tape.
TCIstart play when the power is off (Direct Play Function)
Press the TAPE button. The power is turned on and play of the
insertecl tape begins.
To set the tape counter to 0000
Press the CLEAR button in stop mode.
The counter is also set to 0000 when the cassette holder is
opened.
When tapes are loaded in both decks
After playback on deck 1 finishes, the tape in the deck 2 will
start to play without interruption. (Continuous play)
ENGLISH
10