List Of Rs-232C Commands - Pioneer PDP-433CMX Technical Manual

RS-232 Adjustment Mode

5.5.4 List of RS-232C commands

How to read this table
• RS-232C adjustment validity
• Normal validity
• Numerical direct validity
• Up/Down validity
Command
Full Name
Name
A AJN ADJUST NO
AJY ADJUST YES
AMN AUDIO MUTE NO
AMY AUDIO MUTE YES
B BBY VIDEO RGB YES
BHI B HIGH
BLW B LOW
BR1 BAUD RATE1
BR2 BAUD RATE2
BR3 BAUD RATE3
BR4 BAUD RATE4
BR5 BAUD RATE5
BR6 BAUD RATE6
BRT BRIGHTNESS
BSL B SIDE MASK LEVEL
C CFR CLOCK FREQUENCY
CL1 CLAMP MODE1
CL2 CLAMP MODE2
CM1 COLOR MODE 1
CM2 COLOR MODE 2
CNT CONTRAST
COL COLOR
CP1 VIDEO COMPONENT1
CP2 VIDEO COMPONENT2
CPH CLOCK PHASE
CT1 COLOR TEMP.1
CT2 COLOR TEMP.2
CT3 COLOR TEMP.3
CT4 COLOR TEMP.4
CT5 COLOR TEMP.5
D DIN OSD DISPLAY NO
DIY OSD DISPLAY YES
DOF DISPLAY OFF
DS2 DISPLAY2
DSP DISPLAY
DW0 DOWN 10
DW n DOWN n
DWF DOWN FULL
F FCA FAN CONTROL AUTO
FCM FAN CONTROL MAX
FMB FULL MASK BLUE
FMG FULL MASK GREEN
FMN FULL MASK NO
FMR FULL MASK RED
FMY FULL MASK YES
FRP FRESH POSITION
FXO FIX OUTPUT
180
: Shows availability in RS-232C adjustment mode.
: Shows availability in normal operating mode.
Valid commands can be used even if they do not follow the sending of the AJY
command.
: Shows commands that, if transmitted followed by 3-digit numbers, can directly set
the adjustment value.
: Shows whether or not a command, if transmitted followed by Upn/DWn (with n a
number from 0 to 9), can or cannot increase the adjusted value by that number alone.
RS-232C Numerical
Normal
Adjustment
Validity
Validity
¶ ×
× ¶
¶ ¶
¶ ¶
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ‡
‡ ‡
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ‡
‡ ‡
¶ ¶
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
‡ ×
(NOTE)
Up/Down
Direct
Validity
Validity
× ×
Terminates RS-232C adjustment mode.
× ×
Initiates RS-232C adjustment mode.
× ×
Turns audio mute OFF.
× ×
Turns audio mute ON.
× ×
Sets input setting to VIDEO SIGNAL: RGB.
‡ ‡
Adjusts BLUE HIGH-LIGHT.
‡ ‡
Adjusts BLUE LOW-LIGHT.
× ×
Sets RS-232C baud rate to 1200bps.
× ×
Sets RS-232C baud rate to 2400bps.
× ×
Sets RS-232C baud rate to 4800bps.
× ×
Sets RS-232C baud rate to 9600bps.
× ×
Sets RS-232C baud rate to 19200bps.
× ×
Sets RS-232C baud rate to 38400bps.
‡ ‡
Adjusts brightness.
‡ ‡
Adjusts BLUE SIDE MASK LEVEL.
‡ ‡
Adjusts clock frequency.
× ×
Sets clamp position to AUTO.
× ×
Fixes clamp setting position.
× ×
Sets COLOR MODE 1.
× ×
Sets COLOR MODE 2 (retake).
‡ ‡
Adjusts contrast.
‡ ‡
Adjusts color.
× ×
Sets signal format to COMPONENT 1.
× ×
Sets signal format to COMPONENT 2.
‡ ‡
Adjusts clock phase.
× ×
Sets color temperature to LOW (equal to –3000K).
× ×
Sets color temperature to MID LOW (equal to –2000K).
× ×
Sets color temperature to MIDDLE (± 0K, standard).
× ×
Sets color temperature to MID HIGH (equal to +1000K).
× ×
Sets color temperature to HIGH (equal to +2000K).
× ×
Disables OSD displays.
× ×
Enables OSD displays.
× ×
Turns current OSD display OFF.
× ×
Displays current information.
× ×
Displays current input signal information.
– – Reduces adjustment value by 10.
– – Reduces adjustment value by n.
– – Reduces adjustment value to minimum.
× ×
Puts control of fan's rotation on AUTO.
× ×
Puts control of fan's rotation on MAX.
× ×
Turns full mask blue on.
× ×
Turns full mask green on.
× ×
Releases full mask.
× ×
Turns full mask red on.
× ×
Turns full mask white on.
× ×
Initializes position adjustment data.
× ×
Fixes sound output.
‡ ¶ ×
or : Valid : Invalid
¶
= Not put into last memory
Function