Remote Control Unit - Pioneer PDP-433CMX Technical Manual

2.5 Remote Control Unit

1
2
3
4
5
6
1
SCREEN SIZE button
Press to select the screen size.
2
7 INPUT buttons
Use to select the input.
8
(
connected.)
9
3
MENU button
Press to open and close the on-screen menu.
4
ADJUST (5/∞/3/2) buttons
0
Use to navigate menu screens and to adjust various
settings on the unit.
Usage of cursor buttons within operations is clearly
indicated at the bottom the on-screen menu display.
5
SET button
Press to adjust or enter various settings on the unit.
6
-
MUTING button
Press to mute the volume.
7
AUTO SET UP button
When entering a computer signal to INPUT 1 or 2,
automatically sets the POSITION and CLOCK/
PHASE to optimum values.
8
STANDBY/ON button
Press to put the unit in operation or standby mode.
9
DISPLAY button
Press to view the unit's current input and setup
mode.
0
POINT ZOOM button
Use to select and enlarge one part of the screen.
-
VOLUME (+/–) buttons
Use to adjust the volume.
Remote Control Unit
, , and are used when the PDA-5002 is
17