Pioneer PDP-4304 Operating Instructions Manual page 28

System Settings
6
Press the SET button.
This completes [PICTURE SELECT] setting, and
returns you to the display shown in step 3.
7
After completing settings, press the MENU button
to return to the normal display.
AUDIO
This function allows you to switch the audio signal to
automatic or manual when inputting the digital signal.
1
Press the MENU button to display the menu screen.
STANDARD
PICTURE SCREEN
:
CONTRAST 0
:
BRIGHTNESS 0
:
COLOR 0
:
TINT 0
:
SHARPNESS 0
:
MPEG NR ON
:
DNR MID
:
CTI ON
:
COLOR TEMP. MID
PICTURE RESET
SET ENTER
2
Use the 2/3 buttons to select [SET UP].
STANDARD
PICTURE SCREEN
PURECINEMA
CLAMP POSITION
SIGNAL FORMAT
COLOR DECODING
HDMI INPUT
SET ENTER
3 Use the 5/∞ buttons to select [HDMI INPUT], then
press the SET button.
STANDARD
PICTURE SCREEN
PURECINEMA
CLAMP POSITION
SIGNAL FORMAT
COLOR DECODING
HDMI INPUT
ENTER
SET
24
EN
INPUT2
SETUP OPTION
MENU EXIT
INPUT2
SETUP OPTION
:
OFF
:
:
:
MENU EXIT
INPUT2
SETUP OPTION
:
OFF
:
:
:
EXIT
MENU
4 Use the 5/∞ buttons to select [AUDIO].
HDMI INPUT
PICTURE SELECT
AUDIO
SET SET
5 Use the 2/3 buttons to select [AUDIO] setting.
The unit has been factory set at the AUTO setting.
Each time you press the 2/3 buttons, the setting
changes as follows:
AUTO
ANALOG
AUTO: Automatically identifies input audio signals.
DIGITAL: Accept digital audio signals.
ANALOG: Accept analog audio signals.
Note
Even when AUTO is selected, automatic switching may not occur
properly with some input signals. In this event, select DIGITAL or
ANALOG manually in accordance with the actual signal input.
6
Press the SET button.
This completes [AUDIO] setting, and returns you to
the display shown in step 3.
7
After completing setting, press MENU button to
return to the normal display.
:
AUTO
:
AUTO
MENU EXIT
DIGITAL