Speaker Installation - Pioneer DV-610 Operating Instructions Manual

Speaker Installation

• Default settings: L/R: Large
|
SR: Large SW: On
You only need to make this setting if you
connected this player to your amplifier using the
5.1 channel analog outputs.
This setting does not affect digital audio output.
Initial Settings
Digital Audio Out Audio Output Mode
Video Output Speaker Distance
Language Speaker Installation
Display
Options
Speakers
Use the Speaker Installation screen to tell the
player what kinds of speakers you have
connected.
Use the / (cursor up/down) buttons
1
to select a speaker.
• The and , and
L R SR
paired; you can't set them differently.
Initial Settings
Digital Audio Out
Video Output
L Large
Language
C Large
Display R Large
SR Large
Options
SL Large
Speakers
SW
Press  (cursor right) to modify the
2
selected speaker.
Use the / (cursor up/down) buttons
3
to change the current setting.
• You can see the effect of your changes in
the room graphic on the right of the
screen.
• Except for the subwoofer, you can set
speaker size to Large
speaker cone in the speaker is 12 cm or
more, set to
Large
(or Off if you don't have that speaker).
| C: Large | SL/

5.1 Channel
and speakers are
SL
On
or Small . If the main
, otherwise set to
Small
• If you set the front
, the center and surround speakers
Small
are automatically set to
subwoofer to .
On
• The subwoofer can only be set to
Press  (cursor left) to go back to the
4
speaker list if you want to modify another
speaker, or press ENTER to exit the Speaker
Installation screen.
L and R speakers to
Small and the
On or Off
08
.
49
En