Speaker Installation - Pioneer DV-686A-s Operating Instructions Manual

Initial Settings menu

Speaker Installation

• Default settings: L/R: Large | C: Large | SL/
SR: Large| SW: On
You only need to make this setting if you
connected this player to your amplifier using the
5.1 channel analog outputs.
This setting does not affect digital audio output.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
Use the Speaker Installation screen to tell the
player what kinds of speakers you have
connected.
1 Use the
to select a speaker.
• The L and R, and SR and SL speakers are
paired; you can't set them differently.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
2 Press
selected speaker.
3 Use the
to change the current setting.
• You can see the effect of your changes in
the room graphic on the right of the screen.
• Except for the subwoofer, you can set
speaker size to Large or Small. If the main
speaker cone in the speaker is 12cm or
more, set to Large, otherwise set to Small
(or Off if you don't have that speaker).
Downloaded From Disc-Player.com Pioneer Manuals
Audio Output Mode 5.1 Channel
Speaker Distance
Speaker Installation
(cursor up/down) buttons
L Large
C Large
R Large
SR Large
SL Large
SW On
(cursor right) to modify the
(cursor up/down) buttons
• If you set the front L and R speakers to
Small, the center and surround speakers
are automatically set to Small and the
subwoofer to On.
• The subwoofer can only be set to On or
Off.
4 Press (cursor left) to go back to the
speaker list if you want to modify another
speaker, or press ENTER to exit the Speaker
Installation screen.
07
43
En