Speaker Installation; Speaker Distance - Pioneer VRB1332-A Operating Instructions Manual

Initial Settings menu

Speaker Installation

• Default settings: L/R: Large | C: Large | LS/
RS: Large| SW: On
You only need to make this setting if you
connected this player to your amplifier using the
5.1 channel analog outputs.
This setting does not affect digital audio output.
Initial Settings
Digital Audio Out Audio Output Mode
Video Output Speaker Installation
Language

Speaker Distance

Display
Options
Speakers
Use the Speaker Installation screen to tell the
player what kinds of speakers you have
connected.
1 Use the (cursor up/down) buttons
to select a speaker.
• The L and R, and RS and LS speakers are
paired; you can't set them differently.
Initial Settings
Digital Audio Out
Video Output
L Large
Language
C Large
R Large
Display
RS Large
Options
LS Large
Speakers
SW
2 Press (cursor right) to modify the
selected speaker.
3 Use the (cursor up/down) buttons
to change the current setting.
• You can see the effect of your changes in
the room graphic on the right of the screen.
• Except for the subwoofer, you can set
speaker size to Large or Small. If the main
speaker cone in the speaker is 12cm or
more, set to Large, otherwise set to Small
(or Off if you don't have that speaker).
5.1 Channel
On
• If you set the front L and R speakers to
Small, the center and surround speakers
are automatically set to Small and the
subwoofer to On.
• The subwoofer can only be set to On or
Off.
4 Press (cursor left) to go back to the
speaker list if you want to modify another
speaker, or press ENTER to exit the Speaker
Installation screen.
Speaker Distance
You only need to make this setting if you
connected this player to your amplifier using the
5.1 channel analog outputs.
These settings do not affect any digital audio
output.
To get the best surround sound from your
system, you should set up the speaker
distances from your listening position.
Initial Settings
Digital Audio Out Audio Output Mode
Video Output Speaker Installation
Language Speaker Distance
Display
Options
Speakers
1 Use the (cursor up/down) to select
a speaker.
• The L and R speakers are paired; you can't
set them differently.
Initial Settings
Digital Audio Out
Video Output
L
Language
C
Display
R
Options
RS
Speakers
LS
5.1 Channel
3.0m
3.0m
3.0m
3.0m
3.0m
07
41
En