Speakers Settings - Pioneer DV-610 Operating Instructions Manual

Speakers settings

08
Setting
Audio Output
Mode
Speaker Distance
Speaker
Installation
Audio Output Mode
• Default setting:
Initial Settings
Digital Audio Out Audio Output Mode
Video Output Speaker Distance
Language Speaker Installation
Display
Options
Speakers
If you connected this player to your amplifier
using the 5.1 channel analog outputs (front,
surround, center and subwoofer outs), set this
to 5.1 Channel ; if you connected only the
stereo outs, set to
Note
• Even if you set
, you'll only get sound from all
Channel
speakers when playing a 5.1 channel
multi-channel disc.
• When set to
5.1 Channel
right channels are output from the
OUT (2ch) jacks. Change to
you want to listen to downmixed stereo
audio (for example, because you are
listening through the TV's built-in
speakers).
• When set to
output when playing DVD-Audio.
44
En
Option
2 Channel
5.1 Channel
–
–
2 Channel
2 Channel
5.1 Channel
2 Channel .
Audio Output Mode
, only the front left/
2 Channel
there is no digital
5.1 Channel
What it means
The player outputs analog audio in stereo only. See
also Audio Output Mode below.
The player outputs 5.1 channel analog audio. See
also Audio Output Mode below.
Specify the distance of your speakers from your
listening position. See also Speaker Distance on
page 48.
Specify the number and size of speakers in your
system. See also Speaker Installation on page 49.
• If you set to
and MPEG audio is mixed down to two
channels so you still hear all the audio
recorded on the disc. With DTS encoded
audio, you can choose how the signal is
downmixed to PCM audio. See DTS
Downmix on page 43 to change the
downmix setting.
• Some DVD-Audio discs don't allow down-
mixing of audio. These discs always output
multi-channel audio regardless of the
setting made here.
to
5.1
AUDIO
if
, Dolby Digital, DTS
2 Channel