Dts Downmix; Speakers; Audio Output Mode; Speaker Installation - Pioneer DV-989AVi-G Operating Instructions Manual

Pioneer dvd player operating instructions dv-989avi-g
Hide thumbs Also See for DV-989AVi-G:
Table of Contents

Advertisement

Initial Settings menu

DTS Downmix

• Default setting: Stereo
Initial Settings
Digital Audio Out
CD Playback
Video Output
DTS Downmix
Language
Display
Options

Speakers

i.LINK Setup
If you've selected DTS > PCM in DTS Out on
page 59, or 2 Channel in Audio Output Mode
below, you can choose the way the DTS signal
is downmixed PCM audio. Stereo downmixes
the signal to 2-channel stereo, whereas Lt/Rt
downmixes to a 2-channel signal compatible
with Dolby surround matrix decoders. (This
allows you to hear surround sound if your AV
receiver or amplifier has Dolby Pro Logic
capability.)
If you've selected DTS > PCM in DTS Out on
page 59 and 5.1 Channel in Audio Output
Mode below, the DTS Downmix setting will
automatically be set to Stereo.
Speakers

Audio Output Mode

• Set in Setup Navigator (Default: 2
Channel)
Initial Settings
Digital Audio Out
Audio Output Mode
Video Output

Speaker Installation

Language
Speaker Distance
Display
Channel Level
Options
Speakers
i.LINK Setup
If you connected this player to an AV receiver
using the 5.1 channel analog outputs, set this
to 5.1 Channel. This will enable you to enjoy
multichannel sound.
If you connected only the stereo analog
Stereo
outputs, set to 2 Channel. On this setting
Lt/Rt
multichannel audio is downmixed to 2 chan-
nels for stereo analog output.
• When set to 5.1 Channel, you'll only get
• When set to 5.1 Channel the AUDIO
• When set to 5.1 Channel there is no
• Some DVD-Audio discs don't allow down-
Speaker Installation
• Set in Setup Navigator (default: L/R:
You only need to make this setting if you
connected this player to your amplifier using
the 5.1 channel analog outputs.
This setting does not affect any digital audio
output.
2 Channel
5.1 Channel
sound from all speakers when playing
multichannel discs.
OUT (2ch) jacks output the front L/R
channels of multichannel discs.
optical/coaxial digital output when
playing DVD-Audio discs.
mixing of audio. These discs always
output multi-channel audio regardless of
the setting made here.
Large | C: Large | LS/RS: Large| SW: On)
Initial Settings
Digital Audio Out
Audio Output Mode
Video Output
Speaker Installation
Language
Speaker Distance
Display
Channel Level
Options
Speakers
i.LINK Setup
3 2 Channel
3 Fix
08
71
En

Advertisement

Table of Contents
loading

Table of Contents