Pioneer Elite BDP-23FD Operating Instructions Manual page 60

Problem
07
Secondary audio or
interactive audio is not
output.
Sound is fast or slow.
After a disc is inserted,
Loading stays displayed and
playback does not start.
 is displayed in file names,
etc.
A message indicating low
memory appears while
playing a BD-ROM disc.
The DVD layer of BD and DVD
hybrid discs cannot be
played.
The CD layer of BD and CD
hybrid discs cannot be
played.
The BDMV format on BD-R/
-RE discs cannot be played.
60
En
Check
Is HDMI Audio Out properly
set?
Are Dolby Digital Out and
DTS Out properly set?
When an HDMI cable is
connected, are audio signals
being output from devices
connected with cables other
than HDMI cables?
Are there too many files
recorded on the disc?
Is Hybrid Disc Playback
properly set?
Is Hybrid Disc Playback
properly set?
Remedy
When listening to the sound from an HDMI OUT terminal, set HDMI
Audio Out to PCM (page 39).
When listening to the sound from an DIGITAL OUT terminal, set Dolby
Digital Out to Dolby Digital 1, DTS Out to DTS 1 (page 38).
When a Pioneer AV receiver or amplifier compatible with the PQLS
function is connected directly to the player's HDMI OUT terminal using
an HDMI cable, the PQLS function is activated when playing discs.
Because of this, the sound output from components other than the
ones connected by HDMI cable may be fast or slow. If this happens, set
PQLS to Off (page 39).
When a disc on which files are recorded is inserted, depending on the
number of files recorded on the disc, loading may take several dozen
minutes.
The characters that cannot be displayed on this player are displayed in
.
• Perform Individual/Shared Data Erase or Storage Format
(page 44).
• Perform Application Data Erase (page 44).
Set Hybrid Disc Playback to DVD (page 41).
Set Hybrid Disc Playback to CD (page 41).
To play the BDMV format on BD-R/-RE discs containing both BDMV
and BDAV formats, set BDMV/BDAV Playback Priority to BDMV
(page 41).