Pioneer Elite BDP-23FD Operating Instructions Manual page 39

Setting Options
HDMI High Speed On
Transmission
Off
The player's setting screen is closed if the output video resolution is switched by changing the HDMI High Speed Transmission
setting.
HDMI Color Space Auto
YCbCr 4:4:4
YCbCr 4:2:2
RGB (16 to 235)
RGB (0 to 255)
Normally it is recommended to set this to Auto. When set to Auto, the optimum video signals for your TV are output.
HDMI Audio Out Auto
PCM
Off
On
KURO LINK
Off
Display Power On On
* Only valid when KURO
LINK is set to On.
Off
Display Power Off On
* Only valid when KURO
LINK is set to On.
Off
PQLS Auto
* Only valid when KURO
Off
LINK is set to On.
IP Address
Select this to set the IP address of the player and DNS server (
Proxy Server Only set the proxy server if so instructed by your Internet service provider (
Display Network Select this to display a list of the network settings (
Configuration
Connection Test Select this to test the network connection (page 44).
Explanation
Select this when connected with a High Speed HDMI™ cable (page 14).
Select this when connected with a Standard HDMI™ cable (page 14).
Select this to automatically switch the video output between YCbCr and RGB
signals according to the connected equipment.
Select this to output the video signals as YCbCr 4:4:4 signals.
Select this to output the video signals as YCbCr 4:2:2 signals.
Select this to output the video signals as RGB signals. Choose this if the
colors seem too dense and all the dark colors are displayed in a uniform black
when RGB (0 to 255) is selected.
Select this to output the video signals as RGB signals. Choose this if the
colors seem too faint and the black seems too bright when RGB (16 to 235)
is selected.
The signals are output with as many audio channels as possible. In cases
when the number of channels does not decrease when the signals are output
as such without converting them to linear PCM, they are output as such
(page 47).
Select this when you want the secondary audio and interactive audio signals
to be mixed for output or when you want to output prioritizing sampling
frequency over the number of channels (page 47).
Select this when you do not want to output the audio from the HDMI output
terminal.
Select this to control the player with the remote control of the AV device
connected using an HDMI cable. Also refer to About KURO LINK function on
page 15.
Select this when you do not want to control the player with the remote control
of the AV device connected using an HDMI cable.
Select this when you want the TV to turn on each time playback is started or
the Home Menu or Home Media Gallery is displayed on the player.
Select this when you do not want the TV to turn on each time playback is
started or the Home Menu or Home Media Gallery is displayed on the player.
Select this when you want the player's power to turn off together with the TV's
power.
Select this when you do not want the player's power to turn off together with
the TV's power.
Enables PQLS function (page 15).
Disables PQLS function (page 15).
page 44
page 43
).
page 43
).
).
06
39
En