Kuro Link; Network - Pioneer Elite BDP-23FD Operating Instructions Manual

KURO LINK

Problem
KURO LINK function does
not work.
The input does not switch
automatically on the Flat
Panel TV and AV system (AV
receiver or amplifier, etc.)
when playback is started on
the player or the Home Menu
or Home Media Gallery is
displayed.

Network

Problem
• BD-LIVE function
(connection to the Internet)
cannot be used.
• "Connection to the software
updating server failed" is
displayed when you try to
update the software.
"OK to grant network access
to BD applications?" is
displayed when a BD-LIVE
compatible disc is read.
Check
Is the HDMI cable properly
connected?
Is the HDMI cable you are
using a High Speed HDMI™
cable?
Are you connected to the TV
using an HDMI cable to
watch the picture?
Is KURO LINK set to On on
the player?
Does the connected device
support the KURO LINK
function?
Is KURO LINK set to On on
the connected device?
Are multiple players
connected?
Is Display Power On set to
Off on the player?
Check
Remedy
To use the KURO LINK function, connect the Flat Panel TV and AV
system (AV receiver or amplifier, etc.) to the HDMI OUT terminal
(page 16).
Use a High Speed HDMI™ cable. The KURO LINK function may not
work properly if HDMI cable other than a High Speed HDMI™ cable is
used.
If video signals are being output from a terminal other than the HDMI
OUT terminal, the KURO LINK function does not work. Connect to the
TV using an HDMI cable and press VIDEO SELECT to switch to the
HDMI OUT terminal (pages 16 and 22).
Set KURO LINK to On on the player (page 39).
• The KURO LINK function will not work with devices of other brands
that do not support the KURO LINK function, even when connected
using an HDMI cable.
• The KURO LINK function will not work if devices that do not support
the KURO LINK function are connected between the KURO LINK-
compatible device and the player.
• See About connections to components of other makes supporting the
KURO LINK function on page 16.
• Even when connected to a Pioneer product compatible with the
KURO LINK function, some of the functions may not work.
Also refer to the operating instructions of the connected device.
Set KURO LINK to On on the connected device. The KURO LINK
function operates when KURO LINK is set to On for all devices
connected to the HDMI OUT terminal.
Once connections and settings of all the devices are finished, be sure
to check that the player's picture is output to the Flat Panel TV. (Also
check after changing the connected devices and connecting and/or
disconnecting HDMI cables.) If the player's picture is not being output
to the Flat Panel TV, the KURO LINK function may not work properly.
For details, refer to the operating instructions of the connected device.
The KURO LINK function may not work if three or more players,
including this player, are connected by HDMI cable.
Set Display Power On to On (page 39).
Remedy
Perform Connection Test (page 44). If "Network connection test
completed successfully." is displayed, check the proxy server settings
(page 43). Also there may be a problem with the Internet connection.
Contact your Internet service provider.
This is displayed if the BD-ROM does not have valid BD-LIVE network
access approval. Select No if you do not want to authorize access to the
network.
07
61
En