Table of Contents
Advertisement
Chapter
05
Editing the Navigation Utilities
p Progressive format JPEG pictures cannot
be used.
1
Insert a disc to the disc loading slot.
2
Touch [Settings] in NAVI MENU, then
touch [System Options].
3
Touch [Background Picture Setting].
The picture selected for each screen is indi-
cated on the right side of [Splash Screen],
[Navigation Background] and [AV Back-
ground] items.
4
Touch [Splash Screen], [Navigation
Background] or [AV Background].
5
Touch [Import from Disc].
The list of the pictures stored in the disc is dis-
played.
On this screen, you can select the following
item:
Back to Original:
The picture originally used when the system
was purchased is selected.
p Only when a Pioneer DVD Map Disc is in-
serted, you can select [Back to Original].
Only when the CD-R/-RW and DVD-R/-RW
is inserted, you can select [Import from
Disc].
p Touching other than [Import from Disc] al-
lows you to select a background image
stored on the Pioneer DVD Map Disc.
6
Touch a picture you want for the back-
ground.
7
Select how to display the picture.
You can select the following items:
Center:
Selected picture is displayed at the center of
the screen.
76
En
Repeat:
Selected picture is repeated in a pattern to
cover the whole screen.
The background image starts changing. After
a short while, the new background image ap-
pears.
p When you select images stored on the
Pioneer DVD Map Disc, you cannot select
the layout method.
p When the picture starts to change, do not
turn off the vehicle engine until the mes-
sage appears to indicate that the picture
has finished changing.
8
Touch [Done].
On this screen, you can select the following
items:
Select another Picture:
This is selected when you want to change to
another picture. Return to Step 5.
Change another background:
Select if you want to successively change the
Splash Screen, AV operation screen back-
grounds or the Navigation backgrounds. Re-
turn to step 3.
p When the navigation system is reset, or the
language setting is changed, the back-
ground picture may change back to the ori-
ginal picture. (There is also a possibility that
the system will revert to the original picture
for some other reason.) If this happens, set
the background picture again.
Setting Vehicle Dynamics
Display
You can change the values displayed by the in-
struments on the left and right of Vehicle Dy-
namics Display.
Advertisement
Table of Contents
