Table of Contents
Advertisement
Setting a Route to Your Destination
Setting Areas to Avoid
If you register Designate Areas to Avoid,
such as crowded intersections or congested
areas, routes can be calculated that avoid
those areas.
Registering an area to avoid
This section describes how to register an Area
to Avoid for the first time. You can register up
to five Areas to Avoid.
1
Touch [Route Options] in NAVI MENU,
then touch [Designate Areas to Avoid].
2
Touch [Yes].
3
Select one of the items shown in [New
Area].
When registering for the first time, any item
on the list is shown as [New Area].
4
Select the place to register and display
the map.
= About "Searching places to register", refer
to page 50 to 52.
Once a search is complete, a map with the
specified location at its center appears.
p If you select [Map Search], move the scroll
cursor to the place you want to set and
touch [OK].
5
Change the map scale and decide the
size of the Area to Avoid.
The Area to avoid is enclosed in a red frame.
You can also change the map scale though
the maximum map scale for registering Areas
to Avoid is 0.1 mile (100 m).
6
Scroll the map, adjust the position of
the red frame, and touch [OK].
If you want to stop registration, touch [Back].
p Depending on the setting of route search
conditions, you may not be able to avoid
the specified areas. A confirmation mes-
sage is displayed on the screen at this time.
= For details, refer to Modifying the Route Cal-
culation Conditions on page 59.
Changing or deleting an area to
avoid
You can subsequently change/rename/delete
an Area to Avoid.
1
Touch [Route Options] in NAVI MENU,
then touch [Designate Areas to Avoid].
2
Select the area you want to change or
delete.
3
Select the desired operation.
Rename:
Changes the name. Enter the new name and
touch [OK]. This returns you to Route Op-
tions menu.
Change:
A specified area can be changed. For the next
steps, refer to Step 3 in Registering an area to
avoid on this page.
Delete:
Delete the selected Area to Avoid.
Chapter
04
57
En
Advertisement
Table of Contents
