Xm Tuner; Listening To Xm Satellite Radio - Pioneer Super Tuner IIID AVIC-N5 Operation Manual

Chapter
08 Using the AV Source (Pioneer AV Equipment)
1 Select the repeat range.
= For details, refer to Repeating play on the
previous page
2 Touch [Scan] in Function menu.
Touching [Scan] switches between [On] and
[Off].
The first 10 seconds of each track of the cur-
rent folder (or the first track of each folder) is
played.
3 When you find the desired track (or
folder) touch [Scan] to turn scan play off.
p After track or folder scanning is finished,
normal playback of the tracks will begin
again.

XM Tuner

Listening to XM Satellite Radio

All CH Mode
1 2
7
Category Mode
You can use the navigation system to control
an XM satellite digital tuner (e.g. GEX-
P10XMT), which is sold separately.
For details concerning operation, refer to the
XM tuner's operation manuals. This section
provides information on XM operations with
104
En
3 5 6 4
8
navigation system which differs from that de-
scribed in the XM tuner's operation manual.
Only the logo data that is contained in the na-
vigation DVD Map Disc can be displayed for
each channel. The icon of a newly established
channel that is not contained in the disc can-
not be displayed. When no icon can be dis-
played, the following substitute icon is
displayed.
Substitute icon
p The logo data is not displayed during the
memory navi mode.
p The following functions are not available on
the GEX-P10XMT, GEX-P920XM.
— Switching the XM display
p The following functions are not available on
the GEX-P910XM.
— Using the MyMix function
— Using the direct traffic announcement
function
— Selecting a channel from the XM chan-
nel list display
p The following functions are not available on
the GEX-P900XM.
— Using the MyMix function
— Using the direct traffic announcement
function
— Selecting a channel from the XM chan-
nel list display
— Selecting an XM channel directly
1 Source icon
2 XM band indicator
3 XM preset number indicator
4 XM channel number indicator
5 XM channel select mode indicator
Shows what channel select mode has been
selected. You can select a channel from all
channels in All CH Mode (or
CH Number Mode), and select a channel
from a selected category in
Category Mode.