Table of Contents
Advertisement
Using the AV Source (Pioneer AV Equipment)
= Refer to Switching the XM channel select
mode on this page.
6 XM channel category or XM channel in-
formation
7 Detailed information or preset list dis-
play
8 Category icon
1
Touch [XM] in AV Source screen to se-
lect the XM.
= For details, refer to Selecting an AV source
on page 39.
2
Touch [Band] to select an XM band.
Touch [Band] repeatedly until the desired XM
band is displayed: XM1, XM2 or XM3.
3
To perform tuning, touch
The channels move up or down step by step. If
you keep touching
crease or decrease channel number continu-
ously. You can also perform manual tuning by
pressing the o or p button.
p You can also perform tuning within selected
channel category.
= For details concerning operations, refer to
Selecting a channel in the channel category
on the next page.
Switching the XM channel
select mode
You can switch modes between the two meth-
ods for selecting and listing channels.
All CH Mode (or CH Number Mode):
You can select a channel from all channels.
Category Mode:
You can select a channel within the selected
category.
% Touch [Mode] to select the desired
channel select mode.
Touch [Mode] repeatedly to switch between
the two modes.
or
.
or
, you can in-
Switching between the
detailed information display
and the preset list display
You can switch the left side of the basic screen
according to your preference.
% Touch [Preset] (or [Detail]).
Each touch of [Detail] (or [Preset]) changes
the detail information display or preset list dis-
play.
Detail information display
(e.g. All CH Mode)
Preset list display
(e.g. All CH Mode)
Switching the XM display
% Touch [Disp].
Each touch of [Disp] changes the information
as follows:
GEX-P900XM:
Channel number — Channel name — Artist
name/feature — Song/program title — Infor-
mation
GEX-P910XM:
Channel name — Artist name/future — Song/
program title — Channel category
Chapter
08
105
En
Advertisement
Table of Contents
