Changing the Initial Settings
of AV Receiver
Accessing the Initial Settings Menu
Before operating with the AV Receiver's Initial Setting Menu, set the remote control's
operation mode switch to "AUDIO". (Refer to "Setting the Remote Control for AV Receiver
Operation" on page 19.)
1. Switch the Power off by pressing the SOURCE button for 1 second.
2. Press the MENU button for 2 seconds.
The Initial Settings Menu appears, with "Full Range" highlighted in green.
7 Initial Settings Menu
Setting the Subwoofer
Controller
(See page 102.)
Setting the Rear Speaker
Lead
(See page 102.)
Changing the Pattern of
Plate
(See page 104.)
3. Select the option by moving the joystick.
The selected option is highlighted in green.
4. Click the joystick.
Refer to detailed operation of each function.
Exit from the Initial Settings Menu
• Press the RETURN button.
Exit from the Initial Settings Menu and switch power off.
101
Setting the Time
(See page 103.)
Adjusting the Display
Position
(See page 103.)