Philips HQ8170CC User Manual page 9

During the second phase of the cleaning
,
program, the shaver is placed in the drying
position. It stays in this position until the
end of the program. The cleaning light burns
continuously.
After the cleaning program, the shaver
,
automatically returns to its starting position and
the charging program is started. The charging
light blinks.
Note: If you press the start button or open the lever
during cleaning, the cleaning program is aborted and
reset. In this case, the cleaning light stops blinking and
the holder returns to its starting position.
Note: If the powerplug is removed from the wall socket
during cleaning, the cleaning program is aborted.
The holder remains in its current position. When
the powerplug is put back into the wall socket, the
holder moves to the highest position.
Note: If the fluid volume in the cleaning chamber drops
below the minimum level during the cleaning program,
the program is aborted. The cleaning light blinks with
intervals and the holder returns to its starting position.
Cleaning the washing machine
The cleaning chamber is not dishwasher-proof.
,
Clean the cleaning chamber every two weeks.
,
1 Simultaneously press the buttons on both sides
of the washing machine (1) and lift the washing
machine off the cleaning chamber (2).
The cleaning chamber remains behind.
EnglisH
11