Philips HQ8170CC User Manual page 7

The light above the tap symbol starts to blink
,
after every shave to remind you that the shaver
needs to be cleaned (except when the bottom
light burns red).
Regular cleaning guarantees better shaving
performance.
Note: Water may leak from the socket at the bottom
of the shaver when you rinse it. This is normal and not
dangerous.
Cleaning the shaver in the washing machine
supplied
Preparing the washing machine for use
Fill the cleaning chamber before first use and when
the cleaning light blinks to indicate that the fluid level
is too low. When the fluid level drops below the
minimum level, the cleaning light blinks with intervals
and the holder returns to its starting position.
If you use the washing machine to clean the shaver
every day, refill the cleaning chamber approx. every
15 days.
1 Simultaneously press the release buttons on
both sides of the cleaning chamber (1) and lift
the washing machine off the cleaning chamber
(2).
The cleaning chamber remains behind.
2 Unscrew the dosing cap from the bottle with
HQ200 Cleaning Fluid and remove the airtight
seal.
EnglisH
9