Philips HQ8170CC User Manual page 5

Charging in the washing machine
1 Place the shaver in the holder and push the
lever down completely to lock the shaver into
place.
The charging light on the washing machine blinks to
indicate that the shaver is charging.
When the charging light starts to burn
,
continuously (after approx. 1 hour), the shaver is
fully charged.
2 Move the lever upwards until it does not go
any further (1) and remove the shaver from the
washing machine (2).
The charging light goes out.
using the shaver
shaving
1 Press the on/off button once to switch on the
shaver.
The blue light ring round the on/off button goes on
to indicate that the motor is running.
Note: When you switch on the shaver, all lights go on
and then the remaining battery capacity is shown for a
few seconds.
EnglisH