Software Installation - Noraxon ultium PORTABLE lab Quick Start Manual

Portable Lab Quick Start Guide
4 Installing the Companion Software - myoRESEARCH™
To utilize the full functionality of the Ultium Motion system, and ensure the system has updated drivers, Noraxon's
myoRESEARCH (MR) needs to be installed on the computer.
Note: The Ultium Receiver requires the Noraxon USB device driver which is pre-installed by the MR software installation. It is
also available in the Downloads

4.1 Software Installation

Within the Ultium Portable Lab shipment, there is a USB flash drive containing the latest
myoRESEARCH software.
1. Insert the myoRESEARCH USB flash drive into the PC
2. Open the installer application (e.g., noraxon.mr.4.0.0) and follow the instructions
3. After installation, an icon will be created on the desktop
4.2 Companion Software Activation
The companion software must be activated before unrestricted use is possible.
1. Open myoRESEARCH
2. A dialog box will indicate how many more times MR can be
opened in trial mode
3. Click Activate
4. Enter the License ID provided on your USB flash drive and click Ok
5. If you have an internet connection, click Activate by Internet for
immediate activation
a. Alternatively, email the provided activation ID to
activation@noraxon.com
b. Noraxon Support will email or respond by phone with the
Activation Code
c. Enter the provided Activation Code to remove any
restrictions on use
(Rev C)
section of the Noraxon website.
8