Icom IC-3220A Instruction Manual page 26

7 SCANNING OPERATION
(2) Scan operation Refer to the following table for any scan operation.
However, before operating a scan, rotate [SQL]
clockwise until noise is muted.
1) Program scan
Programmed scan edges. (p. 26)
2) Select VFO mode. | Push and hold
[UP] or [DN] on 4 types of
the microphone resume
for 1 sec. Use the main condition are
Select MEMORY *When dial to change | 2¥allable. Push [UP] or
Memory scan activating the Set the desired
the scan vas
programmable direction condition
remote control i using SET
function, push mode in
[DN] to start advance. (p. 26)
1) Set memory skip the scan.
. channels. (p. 26)
Memory skip scan | >) Select MEMORY
mode.
mode. [DN].