Adjusting Speaker Level During Play; Playing Video Recorded On A Video Camera Or Video Recorder - Panasonic SC-BTX70 Operating Instructions Manual

Basic operations
Status messages
STATUS
The status messages give you information about what is currently
being played. Each time you press [STATUS], the information
displayed will change.
e.g., [BD-V]
No display
Depending on the kind of disc or the playback status,
this display may not appear.
Screen Aspect
When black bars are shown at the top, bottom, left, and right sides of
the screen, you can enlarge the image to fill the screen.
1 Press [SUB MENU].
2 Press [3, 4] to select "Screen Aspect" and press [OK].
3 Press [2, 1] to select "Side cut" or "Zoom" and press [OK].
Normal: Normal output
Side cut: The black bars on the right and left sides of the 16:9
image disappear and the image is enlarged. Please note
that the right and left sides of the image are cut off when
the black bar is not displayed.
Zoom: The black bars on the top and bottom sides of the 4:3
image disappear and the image is enlarged. Please note
that the top and bottom sides of the image are cut off
when the black bar is not displayed.
≥[BD-V] [DVD-V]: "Side cut" does not have any effect.
≥When "TV Aspect" (
"Zoom" effect is disabled.
Setting the sleep timer
-SLEEP
1 Press and hold [–SLEEP] for 3 seconds.
2 While "SLEEP ££" is displayed,
Press [–SLEEP] several times to select the time (in minutes).
SLEEP 30 ) SLEEP 60 ) SLEEP 90 )SLEEP 120 )OFF
^""""""""""""""""""""""""""""""""b
To confirm the remaining time
Press and hold [–SLEEP] for 3 seconds.
≥The sleep timer cannot be set while the Setup menu is displayed.
≥The sleep timer will be canceled in the following cases.
– When the sleep timer is set to "OFF".
– When this unit is turned off from the remote control, main unit or via
the VIERA Link.
RQT9479
18
Type of disc Play status
BD-Video
Play
T: Title Items change
C: Chapter depending on the
PL: Playlist disc played.
Elapsed time in the title
 T1
C1 0:05.14
Current position
36) is set to "4:3" or "4:3 Letterbox", the
e.g.

Adjusting speaker level during play

1 Press and hold [–CH SELECT] for 3 seconds to
activate the speaker setting mode.
2 Press [–CH SELECT] several times to select the
speaker.
Each time you press the button:
L R—) RS_) RB_) LB_) LS_) SW
^""""""""""""""""""""""""b
L R: Front speaker (left and right)
RS: Surround speaker (right)
RB: Surround back speaker (right)
LB: Surround back speaker (left)
LS: Surround speaker (left)
SW: Subwoofer
≥"RS", "RB", "LB" and "LS" will only be displayed if the optional
Surround, Surround back speakers are connected.
– The channels not included in the playing audio will not be displayed
(subwoofer is displayed even if it is not included).
Adjusting the balance of the front speakers
(When "L R" is selected)
3 Press [2, 1] to adjust the balance of the front
0:20.52
speakers.
Total time
Adjusting the speaker level of the subwoofer
optional Surround, Surround back speakers
When "SW" or the optional surround, surround back speakers are
connected and selected in step 2.
4 Press [3] (increase) or [4] (decrease) to adjust
the speaker level for each speaker.
s6 dB to r6 dB
Playing video recorded on a Video
Camera or Video Recorder
[AVCHD] [MPEG2]
It is possible to playback the High Definition (AVCHD format) video
recorded on a Panasonic High definition Video Camera on a
DVD-RAM/R/RW/R DL/+R/+RW/+R DL, or SD card and Standard
Definition (MPEG2 format) Video recorded on the Panasonic SD Video
Camera on a SD card.
1 Insert a disc or SD card. (
≥The "Video (AVCHD)" or "Video (MPEG-2)" screen is displayed.
≥If media containing data in different file formats is inserted, the
file selection menu may be displayed.
Press [3, 4] to select "Play Video (AVCHD)" or "Play Video
(MPEG-2)" and press [OK].
2 Press [3, 4, 2, 1] to select the title and press
[OK].
SLP
≥It may pause for a few seconds between images when
editing such as partial deletion is performed.
≥High definition video (transfer rate of 18 Mbps or faster)
NOTE
cannot be played back correctly if it was recorded on a
DVD compatible to double speed or slower.
To return to the previous screen
Press [RETURN].
To exit the screen
TIPS
Press [TOP MENU/DIRECT NAVIGATOR].
To switch from other menus to AVCHD or MPEG2 menu
(If the media contains data in different file formats)
1) Press [START].
2) Press [3, 4] to select "Menu" and press [OK].
3) Press [3, 4] to select "Play Video (AVCHD)" or "Play
Video (MPEG-2)" and press [OK].
16)
e.g., [SD]
SD Card
Play Pictures (JPEG)
Play Video (AVCHD)
Play Video (MPEG-2)
Select an action or press [RETURN].
OK
SUB
MENU RETURN