Selecting Sound Mode; Whisper-Mode Surround; Adjusting The Speaker Output Level Manually - Panasonic SC-PT570 Operating Instructions Manual

RQTX0229-B_eng.book Page 15 Wednesday, December 24, 2008 12:29 PM

Selecting sound mode

1
Select a sound mode.
SOUND
Each time you press the button:
EQ:
SUBW LVL:
C.FOCUS:
2
Make settings.
While the selected
mode is displayed
Refer to the followings for setting details of
each sound effect.
Equalizer
You can select sound quality settings.
Each time you press [2, 1]:
HEAVY: Adds punch to rock.
CLEAR: Clarifies higher sounds.
SOFT: For background music.
FLAT: Cancel (no effect is added).
Subwoofer level
You can adjust the amount of bass. The unit automatically selects
the most suitable setting according to the type of playback source.
SUB W 1 ,# SUB W 2 ,# SUB W 3 ,# SUB W 4
^--------------------------------------------------------------------------J
≥ The setting you make is retained, and recalled every time you
play the same type of source.
Center Focus
(Effective when playing audio containing center channel
sound or when "ÎPLII" lights in the main unit display.)
You can make the sound of the center speaker seem like it is
coming from within the TV.
C.FOCUS ON,------.C.FOCUS OFF

Whisper-mode Surround

Except [DivX]
You can enhance the surround effect for low volume 5.1-channel sound.
(Convenient for late night viewing.)
≥ "(( ))" lights when there is effect.
MIC VOL
W.SRD
Each time you press the button:
WHISPER-MODE SRD ON
WHISPER-MODE SRD OFF
Preparation
≥ To display the picture, turn on the TV and select the appropriate video
Equalizer
≥ Press [r, s VOL] to adjust the volume to normal listening level.
Subwoofer Level
≥ Select "TEST TONE" from "SPEAKER SETTINGS" in AUDIO menu
Center Focus
1
2
(Effective when playing 5.1-channel sound or when "ÎPLII" lights.)
1 Press and hold [—CH SELECT] to select the speaker.
2 Press [3] (increase) or [4] (decrease) to adjust the speaker level
To adjust the balance of the front speakers, while "L" or "R" is selected,
press [2, 1].

Adjusting the speaker output level manually

input mode.
( 28).
Enter test tone mode.
OK
e.g.
AUDIO-SPEAKER SETTINGS-TEST TONE
SPEAKER
LEFT
CENTER
RIGHT
SURROUND RIGHT
SURROUND LEFT
Test tone will be output to each channel in the
following order.
LEFT, CENTER, RIGHT,
SURROUND RIGHT, SURROUND LEFT
Adjust the speaker level for each
speaker. (CENTER, SURROUND
OK
RIGHT, SURROUND LEFT)
`6 dB to i6 dB (Factory preset: 0 dB)
≥ To exit the screen, press [SETUP].
To adjust speaker level during play
While the speaker channel is displayed, press [—CH SELECT].
L# C# R# RS# LS# SW
^---------------------------------------------}
≥ You can adjust SW (Subwoofer) only if the disc includes a
subwoofer channel and "ÎPLII" is not lit.
≥ "S" appears on the main unit's display when you have selected
"S.SRND" ( 14, Enjoying surround sound effects). In this case, you
can adjust both surround speaker levels at the same time using [3, 4].
S: `6 dB to i6 dB
for each speaker.
C, RS, LS, SW: `6 dB to i6 dB
(L, R: Only the balance is adjustable.)
TRIM LEVEL
− −
0dB
− −
0dB
0dB
SET
RETURN
EXIT : SETUP
15