Wireless Connections (Optional); Connecting The Surround, Surround Back Speakers And The Optional Wireless System (Sh-Fx70) - Panasonic SC-BTX70 Operating Instructions Manual

Blu-ray disc home theater sound system
Hide thumbs Also See for SC-BTX70:
Table of Contents

Advertisement

Wireless connections (optional)

By connecting 1 or 2 units of the optional Panasonic wireless system SH-FX70 with 2 or 4 additional speakers, it is possible to change this unit
into a 4.1 ch or 6.1 ch home theater system.
This system's surround sound effect settings will change (
playback contents. (However, the center channel included in the audio source will be output from the front L R speakers.)
Connecting the surround, surround back speakers and the optional wireless system
(SH-FX70)
∫ Wireless setup diagram
e.g., 4.1ch
Main unit
(with the digital
transmitter)
Preparation
SH-FX70: 1 unit
Additional speakers:
1 set
LS: Surround (left), RS: Surround (right)
≥Place behind the seating position, about 1 m (3 ft) higher than ear
level.
≥Turn off all equipment before connection and read the appropriate operating instructions.
≥Connect the AC power supply cord after all other connections are complete.
≥Do not use the wireless system and digital transmitter in a metal cabinet or bookshelf.
≥Place the wireless system within approximately 15 m (47 ft) from the home theater unit.
NOTE
Connections
∫ Digital transmitter
Do not insert or remove while the main unit is on.
Push!
∫ Wireless system
Connecting the speakers to the wireless system
SPEAKERS
ENCEINTES
LS / RB LB / RS
Connect to terminals of the same color.
AC IN
SURR
I/D SET
SURROUND (3 – 6 )
L
R
SIDE
SIDE
AMBIOPHONIQUES
SURR
L
R
SIDE
SIDE
Impedance: 3 ≠ to 6 ≠
Surround
Speaker input power: 100 W (Min)
selector
∫ AC power supply cord
RQT9479
42
15) and it is possible to listen to the true, original surround audio signals of the
Seating position
LS
Surround speaker cables
SH-TR70 digital transmitter
For 4.1ch connection
SURROUND (LS): Blue
SURROUND (RS): Grey
Speaker cable
For 6.1ch connection
SURROUND (LS): Blue
Insert fully.
SURROUND BACK (LB): Grey
SURROUND (RS): Grey
SURROUND BACK (RB): Blue
AC power supply cord
(included with SH-FX70)
To household AC outlet
(AC 120 V, 60 Hz)
e.g., 6.1ch
Main unit
(with the digital
transmitter)
Seating position
LS
LB
RS
Surround speaker cables
LS: Surround (left), RS: Surround (right)
≥Place on the side of the seating position.
LB: Surround back (left), RB: Surround back (right)
≥Place behind the seating position, about 1 m (3 ft) higher than ear level.
1 Push $ to open the digital transmitter door.
2 Insert fully until you hear a click.
Selector setting for the
left and right speakers
Selector setting for the
left speakers
Selector setting for the
right speakers
Preparation
SH-FX70: 2 units
RS
RB
Additional speakers:
2 sets
SURR
L
SIDE
R
SIDE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sabtx70 - blu-ray receiver

Table of Contents