Adjusting Speaker Output Level - Panasonic SC-HT65 Operating Instructions Manual

Settings
HDMI settings
Standby selection
OFF: Standby power consumption reduced
(approximately 0.35 W).
• Signals from DVD equipment cannot
pass through HDMI connection to the
television when the unit is in standby
(➡ page 8).
• VIERA Link "HDAVI Control" (➡ page 8)
does not work when the unit is in standby.
ON: Normal standby power consumption
(factory setting)
(Dynamic range compression)
DRCOMP
• Change this setting to listen to software recorded with Dolby
Digital at low volume (such as late at night) and maintain audio
clarity. It reduces the peak level in loud scenes without affecting
the sound field.
OFF: The software is played with the original dynamic range (factory setting).
STANDARD: The level recommended by the producer of the software for household
viewing.
MAX: The maximum allowable compression (recommended for night viewing).
(A/D Attenuator)
Attenuator
• Turn the A/D attenuator on if "OVERFLOW" lights frequently
when using 2-channel analog input.
• Delay audio if there appears to be a difference in timing between
TV delay
audio and pictures.

Adjusting speaker output level

RECEIVER TV
AV
SYSTEM TV
^ ^
VOLUME
VOLUME
TUNER BD/DVR
BAND DVD-P
TV/AV
1
2 3
VOLUME
4 5 6
7 8 9
-/--
AUTO SETUP MUTING
0 10
SKIP
SLOW/SEARCH
u i t y
STOP PAUSE PLAY
q
g h
DIRECT NAVIGATOR FUNCTIONS
TOP MENU
OK
SUB MENU/
PLAY LIST RETURN
-EFFECT -LEVEL
C.FOCUS TEST
OFF MUSIC MOVIE
%PL
SFC
Output the signal.
-LEVEL
TEST
Press and hold.
TEST L
L C R SR SL SUBW
14
SC-HT65 GN-En.indb 14
Switch on.
• To reduce standby power consumption.
• Choice for turning off the VIERA Link "HDAVI Control
(➡ page 8).
VIERA Link "HDAVI Control"
OFF: VIERA Link "HDAVI Control"
ON: VIERA Link "HDAVI Control"
C (center), SR (surround right) and SL (surround left) can be adjusted between -10 dB and
+10 dB, with 0 dB being the level of the front speakers. Adjust center and surround output to
the same apparent level of the front speakers.
For SUBW (subwoofer), you can select "SUBW OFF" so there is no output, "SUBW MIN"
for minimum output, a level between 1 and 19, or "SUBW MAX" for maximum output. Adjust
subwoofer output so it is balanced with the front speakers.
-LEVEL
TEST
Adjust the main Select the speaker
volume. channel.
VOLUME
MENU
TUNE
SETUP ENTER
RETURN
"
TM
is OFF
is ON (factory setting)
Adjust the level.
-LEVEL
TEST
C +4dB
Repeat for each speaker channel
Display
MENU TUNE
SETUP
ENTER
RETURN
SETUP MIC
2a 2b
HDMI STNBY
CTRL
DRCOMP OFF
STANDARD
MAX
ATTENUATOR OFF
ON
TV DELAY OFF
ON
Stop the test
signal.
-LEVEL
TEST
Press and hold.
8/17/2007 4:20:19 PM
3
OFF
ON