Ipod Playback - Panasonic SC-BTX70 Operating Instructions Manual

Using the iPod

iPod Playback

This system features two different iPod playback modes.
The first of these is EXTENDED mode, for playback of music and video contents. With this mode, you can operate the iPod from the main unit.
The second mode is SIMPLE mode, which can be used for playback of three types of contents – music, photos, and videos. With this mode,
simple operations such as play, stop, and search can be performed on the display of your iPod.
Enjoy music/video (EXTENDED mode)
1 Press [iPod] to select "IPOD".
The iPod automatically switches to this unit's display mode.
To switch the menu, press [STATUS] several times.
Music menu
^"
≥"MUSIC" or "VIDEOS" is displayed on the main unit.
–When playing back video contents, ensure the video
connection to the VIDEO OUT terminal on this unit (
and switch the TV input to video in.
2 Press [3, 4] to select an item and press [OK].
≥Play starts from the selected song or video.
≥To display the previous or next page
Press [2, 1].
≥Press [RETURN] to return to the previous screen.
e.g., music playback screen
Song
Artist
Album
Playing position
Playback mode
Clear/display iPod Music or Video menu during playback.
Press [TOP MENU/DIRECT NAVIGATOR].
≥If the Video menu (EXTENDED mode) is accessed, the
video shuffle playback mode on the iPod is set to "Off"
when the iPod is disconnected from the unit.
NOTE
Enjoy photos (SIMPLE mode)
You can also play music and video using SIMPLE mode.
1 Press [iPod] to select "IPOD".
2 Press [STATUS] several times to select the iPod
menu (iPod LCD).
≥"ALL" is displayed on the main unit.
≥ If the sliding door is closed, press [iPod < OPEN/CLOSE] to open it.
The main unit will continue to operate even if the sliding door is open.
Proceed operations through the iPod display.
3 Switch the TV input to video in.
≥ Ensure the video connection to the VIDEO OUT terminal on this unit ( 9).
4 Play a slideshow on your iPod.
The picture will be displayed on your TV.
You can also use the remote control to operate iPod menu.
≥[3, 4]:
To navigate menu items
≥[OK]:
To go to the next menu
≥[RETURN]:To return to the previous menu
The remote control operation may vary between iPod models.
RQT9479
You can select the surround sound effect when you press [SURROUND] (
You can select the sound mode when you press [SOUND] (
28
"""""#
Video menu
!}
iPod menu (iPod LCD)
e.g., music main menu screen
iPod Music
Playlists
Artists
Albums
Songs
Podcasts
Audiobooks
OK
RETURN
Playback condition
iPod
Good morning
Ronaldo
Happy days
Shuffle (Albums)
Repeat (All)
Other methods of playback
While in "Music" or "Video" mode, it is possible to select the following
playback modes.
Items
Playback Shuffle*
≥Off:
Mode
≥Songs:
9)
≥Albums:
Repeat
≥Off:
≥One:
≥All:
*1 For music playback only.
1 Press [START].
2 Press [3, 4] to select "Menu" and then press
[OK].
3 Press [3, 4] to select "Playback Mode" and
then press [OK].
4 Press [3, 4] to select an item and press [OK].
5 Press [3, 4] to select the setting and press
[OK].
Playback modes during and after connection.
≥Music playback modes set on the iPod will be maintained
when connected to the main unit. Changes made while
NOTE
the iPod is connected to the main unit be kept on the iPod
after disconnecting it.
≥If the Video menu (EXTENDED mode) is accessed, the
2:43
video shuffle playback mode on the iPod is set to "Off"
45 of 1230
when the iPod is disconnected from the unit.
To return to the previous screen
Press [RETURN].
TIPS
Basic controls
While playing music or video it is possible to use the following buttons
of the remote control.
Buttons
[1PLAY]
[∫STOP]
[;PAUSE]
[SKIP:, SKIP9]
(Press and hold)
[SEARCH6,
SEARCH5]
≥Use the controls on the iPod unit during photo playback.
15).
15).
Selection/playback method
1
Cancel
Play all songs on iPod in random
order.
Play all songs on album in random
order.
Cancel
Play a single song/video
repeatedly.
Play all songs/videos from
selected items (e.g., Playlists,
Albums, etc.) repeatedly.
Functions
Play
Pause
≥Press [1PLAY] to restart play.
≥Playback start position may not be stored
in memory in certain cases.
Skip
Search