A&D UC-352CEL Instruction Manual page 13

Airplane Mode Setting
Airplane mode setting will disable the network connection
and conserve battery for users that are no longer enrolled in
a RPM program. Do not turn airplane mode on if you are
still enrolled in a RPM program.
1. Press and HOLD the set switch for 5 seconds.
2. "oFF" will be displayed and flash. Press set switch to toggle
between "oFF" and "on."
3. After confirming setting, wait 3 seconds and "End" will be
displayed. The setting is saved.
Note: When airplane mode is "on," the network is disabled. The
will be always be displayed. Automatic clock will not be set and measurements will not be
transmitted to provider. Do not turn airplane mode "on" if you are still enrolled in a RPM
program.
Other Functions
Automatic Power Off Function
The scale has an "Automatic power-off" function. After the measurement results are
displayed for 60 seconds, the scale is automatically turned off.
Transmitting Temporarily Stored Data
If measurement data cannot be transmitted to the cloud, this scale can temporarily
store data of a maximum of 90 measurements in the built-in memory. When the
scale is able to transmit to the cloud, all of the data is transmitted. If the amount of
data temporarily stored exceeds 90 measurements, the oldest data is deleted and
replaced with new data.
• Stored data cannot be viewed on this scale.
• The amount of data that can be temporarily stored may vary with the application.
and symbols
E-13