A&D UC-352CEL Instruction Manual page 12

Taking a Measurement
Step On
1. Confirm that the scale is turned off, and step on the
scale gently.
• Measurement starts when you step on the scale.
• A progress bar is displayed during measurement.
Stand up straight and remain as still as possible
during measurement.
2. Step off the scale when "StEP" and "oFF" are
alternately displayed with three beeps.
• If you do not step off, the scale beeps every two
seconds.
• All display segments are indicated when you step
off the scale.
• Do not touch the scale while all display segments
are displayed. It may cause misreading.
3. Confirm the measurement results.
• The scale turns off automatically 60 seconds after
the measurement results are displayed.
• Data is automatically sent to the cloud database.
• If the scale is not able to connect to the cloud, then
the data will be stored in the scale memory. (See
"Transmitting Temporarily Stored Data".)
• Data stored in the scale memory cannot be viewed
on this scale.
• You can also shut the power off by pressing the set
switch.
• The most recent readings will be shown on the
screen.
E-12
Beep
Beep beep beep