Panasonic Toughbook CF-F9KWH011M Reference Manual page 199

Check the Computer's Usage Status
Save a copy of the screen to a file
You can save a copy of the screen currently being displayed to a file in bitmap format (.bmp).
Display the screen you want to save.
A
Press Ctrl + Alt + F7.
B
When the message "The copy of the screen was saved..." is displayed, click [OK].
C
[pcinfo.bmp] file will be saved in
already exists, it will be overwritten. (If [pcinfo.bmp] file is set as a "Read-only" or "Hidden" file, the new file
cannot be saved.)
To display the extension of the file:
Click
Windows 7
[Advanced settings], remove check mark [Hide extensions for known file types].
Click [Tools] - [Folder Options] - [View] from Explorer, and remove the check mark for
Windows XP
[Hide extensions for known file types] under the [Advanced settings] section.
NOTE
You can also save a copy of the screen to a file using the following procedure:
Click (Start)/
Windows 7
At the time of purchase, the computer is set so that a copy of the screen can be saved to a file by pressing
Ctrl + Alt + F7. This setting can be changed using the following procedure:
Log on to Windows as an administrator.
A
Click
Windows 7
B
Right-click [Screen Copy], and then click [Properties] - [Shortcut].
C
Move the cursor to [Shortcut key], press the key to be used for the shortcut, and then click [OK].
D
Click [Continue].
Windows 7
E
Pictures are saved in 256 colors.
When using an Extended Desktop:
A copy of the screen displayed on the primary device will be saved.
[Documents]/
Windows 7
(Start) - [Control Panel] - [Appearance and Personalization] - [Folder Options] - [View]. In
[start] - [All Programs] - [Panasonic] - [PC Information Viewer] - [Screen Copy].
Windows XP
(Start)/ [start] - [All Programs] - [Panasonic] - [PC Information Viewer].
Windows XP
[My Documents] folder. If [pcinfo.bmp] file
Windows XP
199