Hard Disk Data Erase Utility - Panasonic Toughbook CF-F9KWH011M Reference Manual

Hard Disk Data Erase Utility

When disposing the computer or transferring the ownership, erase all hard disk data in order to avoid data leakage. Even if
you erase the data or initialize the hard disk using normal Windows commands, the data can be read with some special
software. Use the hard disk data erase utility to erase the data completely.
Note that transferring of the ownership without uninstalling the commercial software will be a violation of the software's
license agreement.
The hard disk data erase utility erases data using an overwriting method, but there is a possibility that due to malfunctions or
other operational errors, data may not be completely erased. There are also specialized devices that may be able to read
data that has been erased using this method. If you need to erase highly confidential data, we recommend that you contact
a company that specializes in this process. Panasonic Corporation will bear no responsibility for losses or damages suffered
as a result of the use of this utility.
NOTE
This utility cannot erase data for specific partitions. However, the entire hard disk data including the data of the
partition with recovery tools will be erased.
Preparation
Prepare the following items:
• The Product Recovery DVD-ROM (included)
<CF-C1 Series>
• CD/DVD drive (optional:Refer to recent catalogs and other sources for information about the products
available) or port replicator (optional: CF-VEBC11U)
Connect the AC adaptor and do not remove it until hard disk data erase is complete.
Remove all peripherals (<CF-C1 Series> except for the CD/DVD drive and port replicator).
1
<CF-C1 Series>
Turn off the computer and connect the CD/DVD drive or port replicator to the computer.
2
Turn on the computer, and press
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
3
Write down all of the contents of the Setup Utility and press
At the confirmation message, select [Yes] and press Enter.
4
<CF-F9/CF-S9 Series>
Select the [Main] menu, then select [Optical Drive Power] and press
5
<CF-F9/CF-S9 Series>
Select [On] and press
6
Press .
F10
or
F2 Del
.
Enter
while [Panasonic] boot screen is displayed.
.
F9
191
.
Enter