Panasonic Toughbook CF-F9KWH011M Reference Manual page 181

Troubleshooting (Advanced)
Click
Windows 7
B
Input [getmac /fo list /v], and press Enter.
Windows 7
C
Insert a space between "fo" and "list", and between "list" and "/v".
Input [ipconfig /all], and press Enter.
Windows XP
Wireless LAN's MAC address:
D
Make a note of the 12-digit string of alphanumerics displayed on the wireless LAN's "Physical Address" line.
LAN's MAC address:
Make a note of the 12-digit string of alphanumerics displayed on the LAN's "Physical Address" line.
Enter "exit", and press Enter.
E
Problems with Wireless LAN (only for models with wireless LAN)
Access point is not detected
Shorten the distance between the computer and the access point, and try the detection again.
Confirm the following settings:
• [Wireless LAN] in the [Advanced] menu of the Setup Utility
Confirm that [Wireless LAN] is set to [Enabled]. (
• Wireless LAN power supply
Slide the wireless switch to the right (ON).
<CF-C1 Series>
This computer uses channels 1 through 11
point.
If there are more than one wireless function equipped, right-click the Wireless Switch Utility icon (
confirm that [Wireless LAN ON] has been checked.
*3
In the case of wireless communications, the frequency band being used can be divided into segments, so that different communications
can be conducted on each band segment. A "Channel" refers to the individual frequency bandwidth divisions.
(Start)/ [start] - [All Programs] - [Accessories] - [Command Prompt].
Windows XP
page
<CF-F9 Series>
*3
when using IEEE802.11b/g. Check the channel being used by the access
151)
<CF-S9 Series>
181
page 134) and